Home of model lighting and accessories
Glow Plug Driver
Programable Twin Switch
Single switch
LED Power Boards
Servo Slower
Servo reverser
Signal Amplifier
Smoke Control Unit
Nav & Decklight controller
Machine Gun Controller
Beacon Light Controller
Rudder Mixer
This system is designed to fit neatly onto your glow plug
with the control unit fitted snugly inside your aircraft.
Available for single, twin or multiple glow** engines, the glow can be operated via any transmitter switch or your
throttle stick position, fully programable it lets you
select the on/off position in seconds making this set
truelly Plug & Play.
** multiple glow engine glow systems are only available by order and may take up to 10 days for dispatch.
Suitable for plane, heli, boat and car glow engines
HD017 Single glow plug driver
HD018 Twin glow plug driver
£22.99
£38.49
The programable twin switch turns on/off two devices
from the one transmitter switch, being programable you
can select both devices to come on at the same time
or one device at a time.
Suitable for a wide range of electrical devices
ED003 Twin switch unit
£37.20
The single switch will turn any device up to 8amp on/off via
a single transmitter switch. Plug the unit into
your reciever then your devices negative supply into the
control unit then your input power into the unit and your
done
ED004 Single switch unit
£18.99
The LED power board is a unique device which will allow
the use of multiple LED's to be powered without the use
of any resistors or wiring the bulbs in series.
Available for 1,2 or 3 color bulbs with an input voltage
range of 1v - 12v.
Especially suited for strings of bulbs on boats or model
trucks
ED005A Single color LED driver
£10.65
ED005B Dual color LED driver
£12.50
ED005C 3 color LED driver
£14.20
The servo slower does exactly as it's name, designed to
slow down the servo arm movement which is especially
useful with the scale effect of mechanical retracts or for
using that old servo as a rotating radar on boats
Plug & Play this unit fits inline with your reciever and servo
ED006 Servo slower
£9.99
The servo reverser is designed to literally reverse the
direction your servo arm will travel, this is especially
useful with tricycle undercarriages or any surface that
requires two servos to operate side by side.
ED007 Servo Reverser
£9.99
The signal booster is especially designed to boost the
servo's input signal from the reciever where the servo is
at longer distances thereby removing any delay in the
servo's operation
ED008 Servo Booster
£8.99
The smoke control unit simply plugs into your reciever and
allows the smoke unit to turn on/off via any Tx switch or
by the Tx throttle stick.
ED009 Smoke Control Unit
£19.99
Our new Nav & Decklight unit allows the navigation lights
to be turn on via your throttle stick and the deck lights
to be turned on/off via any transmitter switch.
Can also be used to control the headlights, spotlights etc
on cars or trucks
ED010 Nav & Decklight Control Unit
£29.00
Designed to function from any Tx switch, the machine gun
unit provides 3 different lighting effects to stimulate
working machine guns, includes 6 Amber 3mm bulbs.
ED011 Machine Gun Control Unit
£15.99
Available with 5mm, 8mm or 10mm bulbs of any color
please state at checkout your preference otherwise the set
will be shipped as above
Reciever powered beacon light designed to give a beacon
effect and includes a 5mm Red bulb with red reflective
lens cover
ED012 Beacon Unit
£11.99
The rudder mixer is designed to give you full rudder
control unsing two motors on model boats without the use
of a mechanical rudder, simply fit inline with your motors
reciever throttle/rudder channel and your done.
ED014 Rudder Mixer
£9.99
NO
IMAGE
NO
IMAGE
NO
IMAGE
NO
IMAGE
NO
IMAGE
NO
IMAGE
NO
IMAGE
NO
IMAGE
NO
IMAGE
NO
IMAGE
Lets go shopping
ELECTRONICS